ADDCO/TCCoA Performance Anti Sway Bars

As of 02-20-02
1989-97 Thunderbirds, Cougars and the 1993-98 Mark VIII

Note: All TCCoA 1 1/4" and 1 3/8" bars come in a black powdercoat
finish and are only available to current TCCoA members
Join the TCCoA
These ADDCO/TCCoA  kits will fit the 89-97 Thunderbirds and Cougars as well as the 93-98 Mark VIII. These kits come with all the necessary hardware that the upgrade requires such as polyurethane bushings, End link kits, Spacers, Collars, etc...

The ADDCO 1 1/8" rear anti sway bar kit offers a notable increase in handling performance over the stock rear bar and can be used with in conjunction with the stock front bar.

The ADDCO/TCCoA 1 1/4" rear anti sway bar kit offers even greater handling performance over the 1 1/8" bar kit and this comes with only a minimal increase in ride stiffness.  This kit is highly recommended for the person who wants to obtain the in best handling performance for thier MN12 while keeping the stock front bar.

The "Street Sport" package is a  1 1/4" front and rear anti sway bar combo. This upgrade kit offers greatly enhanced handling performance over the stock configuration with only a moderate increase in ride stiffness. This kit is highy recommend for all MN12s and the handling diifference over the stock bar configurations is considerable.

The  "Competition" package is a 1 3/8" front and rear anti sway bar combo. This upgrade kit will enhance the car's handling performance over 1 1/4" combo but this comes with a slight increase in ride stiffness. This kit is the ultimate anti sway bar upgrade for those of you who wish to achive the highest level of handling pontential possible from your MN12.  The ride stiffness increase with this setup is not excessive but is noticeable over the stock and 1 1/4" upgrade configuration. For those of you who live in areas that have very poor road conditions the 1 1/4" kit may be a better choice.

NOTE: The above system ( Competition 1 3/8" F/R ) may not be suitable for the 3.8 N/A MN12s. This concern is due to the 3.8 N/A lesser front end weight compared to the other MN12s. Currently a few 3.8 N/A MN12 owners are testing out this kit and as soon as we have more info this page will be updated. So far the feedback has been very positive and our concerns may be unwarranted.

The 1 3/8" front bar should  be used only with a 1 3/8" rear bar and vice versa.

The 1 1/4" front bar should be only used with the 1 1/4" rear bar.

The 1 1/8" rear bar can be used with the stock front bar.

The 1 1/4" rear bar can be used with the stock front bar.

Below are the TCCoA current member prices for the ADDCO/TCCoA MN12 anti sway bar kits:

1 1/8" Rear bar kit:  Gold-Zinc finished $104.92 + shipping

1 1/4" Rear bar kit:  black powdercoated $121.24 + shipping

1 1/4" Front bar kit:  black powdercoated $121.24 + shipping

1 3/8" Rear bar kit:  black powdercoated $126.49 + shipping

1 3/8" Front bar kit:  black powdercoated $126.49 + shipping

1 3/8" Competition Front/Rear package $252.98 + shipping

1 1/4" Street Sport Front/Rear package $242.48 + shipping
 

For any questions please contact Mark McCormack,
Vice President TCCoA at MarkM@TCCoA.com




TCCoA Home

© Copyright  2002 TCCoA.com
 All rights reserved.