Club Related
TCCoA Tech Articles
Car Related
Marketplace
Vendor Member Section
Off Topic Section
Regional Forums & Clubs
Latest Posts
-
ExteriorSAFETY FIRST!!! WEAR SAFETY GLASSES WHEN YOU CUT INTO PARTS, BE AWARE OF SHARP EDGES AND HOT MELTED PLASTIC. I'M NOT RESPONSIBLE FOR ANY ERRORS ON YOUR PART To do this you're going to need to order these LEDs from Alltronics.com. They list the part as #96L001, they cost around $14. There's...
- 27
- 5K
-
between painting of parts and r& i of stuff, im done. seat side trim is a different grey than the console stuff. took the console out and changed the heater tube. cut the front of the console bin for the lighter and hid it. what a pain in the ass. hope its worth it.
- 2
- 64
-
Hello all, I know this is yet another suspension question about struts from the look of it but I wanted to know if there was a str8 up non modified strut option that exists for the T-bird to where you can install a bolt on ride height adjustable strut to use for lowering on the drag strip and...
- 75
- 1K
-
SuspensionWhat’s up fellaz. Yesterday I got around to getting rid of the stock rag joint for this joint. Part number is uncludes, the stub from TCSB which was 30$. The install was pretty easy not problems there, not really any tips to give. The joint might be a tight to remove but nothing crazy. Over...
- 0
- 72