TCCoA Forums banner

Search results

1-20 of 78 Results
Advanced Search
  1. XR7 race weekend

    Videos/Images
    thanks brother, still on the island?
  2. XR7 race weekend

    Videos/Images
    hows everyone doing?
  3. video link: sleeper

    Videos/Images
    thumbs up!
  4. video link: sleeper

    Videos/Images
    https://youtu.be/iqm9sYQmmlY what do you think? what makes a sleeper?
  5. Power Limits for Aluminum Block and Cast Crankshaft

    Engine - 4.6L & 5.4L
    its fuel injected ,I did not use the victor jr .
  6. Fuel Injector Questions

    Engine - 4.6L & 5.4L
    just calibrate it : https://www.ebay.com/itm/Delta-Force-Sniper-Tuning-Special-Forces-Kit-For-Gas-Or-Diesel/332536921658?hash=item4d6cbebe3a:g:XXcAAMXQ6BRRYpN9&vxp=mtr works for me
  7. Head gasket or intake manifold?

    Engine - 4.6L & 5.4L
    if there is no antifreeze on the dip stick it most likely is the tube running under the intake which is great because the valley is closed off and wont wreck the engine. check your dipstick ,if it is not slimey pull the intake off and replace the heater core tube as someone else has referred to...
  8. Power Limits for Aluminum Block and Cast Crankshaft

    Engine - 4.6L & 5.4L
    McKeown 4.6L Mod Motor - Hot Rod Network I own this engine bolted on my vortec v2 with 12 psi no issues 800 + at the flywheel on 91 cast crank.
  9. Turn Signal Only Work Intermittently

    General Tech
    first check bulbs and sockets and grounds. + try known good flasher there is a separate flasher for the 4 ways if the 4 ways work swap it out. if that doesn't heal the problem the steering column has to come apart down to the signal coupler ,brass touch fingers are probably dirty and not...
  10. 1996 xr7 parting out

    Parts For Sale
    keeping motor transmission and fuel system,so everything else is fair game
  11. 1996 xr7 parting out

    Parts For Sale
    4.6 supercharged automatic
  12. 1996 xr7 parting out

    Parts For Sale
    yes
  13. 4.6 DOHC in F100 - Rattling sound in engine, video link attached - Help please!

    Engine - 4.6L & 5.4L
    replace them all and hope for the best. I replaced mine from ebay cheap .they are widely used and relatively cheap. same lash adjuster is used in the 4.7 mopar small v8. if this is a Lincoln engine I have a good set of rods out of Lincoln engine I have swapped out for h-beams. lets hope its a...
  14. 1996 xr7 parting out

    Parts For Sale
    yup
  15. 1996 xr7 parting out

    Parts For Sale
    https://youtu.be/F7CNL13P2QY parting out 1996 cougar xr7 has the mustang wheel conversion $500 rear end has ford racing 4:30 gears with posi $500 keeping the engine and transmission everything else is fair game. car at the track: https://youtu.be/PYRgbNCusBE
  16. 4.6 DOHC in F100 - Rattling sound in engine, video link attached - Help please!

    Engine - 4.6L & 5.4L
    lash adjuster if it was a rod knock it would be there on initial start. worth a try
  17. New Project - 97 w/ Mid 12s Goal

    Engine - 4.6L & 5.4L
    high compression with a supercharger is ok. I have run 11.3 on 91 octane with 14 pounds of boost with no issues.
  18. Tapping the Oil Pan for a Vortech

    Supercharging
    just an fyi there is no difference between the tbird and mustang with respect to punching the hole and tapping it out ,which is the best method if you are trying to keep filings out of the pan for an in car install. good luck on your build
  19. Rear axle shafts.

    Drive Train
    a source for better then stock cv joint assembly. broke it off at the outer hub.
  20. Began final completion of 1MTNCAT engine build

    Miscellaneous
    if the car is not street driven then dry makes sense I suppose. cool setup,hope you get it where u want it.
1-20 of 78 Results
Top