TCCoA Forums banner

Search results

1-20 of 185 Results
Advanced Search
  1. AED Intercooler Tank Bracket

    Wanted
    If I remember, they were a 1/4 inch aluminum, a squared U shaped, with a couple of holes drilled and threaded for botton head allen bolts for the tabs on the pop can. It also had a coupe of spacers and allen head bolts to raise it 1.5 inches at the manifold. Read ya later, Nick
  2. AED Intercooler Tank Bracket

    Wanted
    I thought those pop can resevoirs were to small. You might consider moving the battery to the trunk and piping up to a larger reservoir were the battery is. Read ya later, Nick
  3. WTB, Rear Subframe Bushing Kit

    Wanted
    I know about SCP and I agree with you. I've tried to get in touch with Jay since last year and I've had no success. I've bought his spring perches and rear LCAs and find them to be top notch products. I have read somewhere on SCCOA that Jay is making SCP's UHMW. Price is why I'm checking to...
  4. AED 2.5” pulley

    Wanted
    Thank you sir. Payment received read ya later, Nick
  5. AED 2.5” pulley

    Wanted
    Still not coming through. You're not in email or spam. Try to use private messages. Read ya later, Nick
  6. WTB, Rear Subframe Bushing Kit

    Wanted
    Does anyone have a set they want to sell in poly or UHMW? Read ya later, Nick
  7. AED 2.5” pulley

    Wanted
    I did not get the email
  8. First Drag Strip Runs with New Combination

    Racing
    Inching in for the mark. Have you ever disconnected the on side of the front anti-sway bar for weight transfer. I've not done it myself but have heard that it helps. Read ya later, Nick
  9. FR500 Intake Manifold

    Engine - 4.6L & 5.4L
    CMVC's is an acronym for what? I know IMRC is intake manifold runner control. Long runner or short runner, I plead ignorance. Yesterday we had her on the dyno and found at 3500 RPM there was a dip of 20-15 horse power, a lower RPM setting would yield more loss, so we increased the RPM window to...
  10. Pre-bend mandrel true duals

    Exhaust
    Yes sir, like a Dynomax Ultra-Flo X 17553, I believe that the 2.5 inch. Magna Flow 11385 has a nice 2.25 inch Reda ya later, Nick
  11. FR500 Intake Manifold

    Engine - 4.6L & 5.4L
    I have some questions about this intake that I have and I'm looking to see if anyone else has been exposed to one of these gems. I did not know there was an issue until we fired her up. 1. Below 3500 RPM is it normal for the IMRC plates to rattle? Actually the rods are loose and causes the...
  12. Pre-bend mandrel true duals

    Exhaust
    I've used Mandrel Bent Exhaust on 5 different builds My favorite sounding builds are with the dual in dual out muffler were the 3rd cat resided. With a mild built 4.6 with stock manifolds sounded the best, IMO. Read ya later, Nick
  13. Post your Dyno Graph

    Videos/Images
    I finally got my 5.2LX Boss on the dyno. Not bad for an NA and manual trans, like most, hoping for more. Read ya later, Nick
  14. 17x8s on all 4 wheels

    Tires/Wheels
    I just got some 17x8/9, 35mm back spaced wheels. I had to change to the 5x4.5 bolt pattern but their is more styles to choose from. I need to remove the rear wheels and shave on the axle ends to accommodate the center caps. Read ya later, Nick
  15. WTB; SpeedCal ER or SR

    Wanted
    Like the title says, as long as it's working. Read ya later, Nick
  16. Ford v. Ferrari

    Videos/Images
    Reminds me of "The Fastest Indian", a must see flic for the for the gearhead. Read ya later, Nick
  17. The Joke Thread...

    Miscellaneous
    What do you get with a spot free rinse? Spots at no extra charge. Read ya later, Nick
  18. First Drag Strip Runs with New Combination

    Racing
    Well done sir, and you did the Epic Drive also. Outstanding I look forward to seeing ya break into the 10's Read ya later,Nick
  19. Tremeck 3650 and SpeedCal ER

    Stick Transmission Swaps
    Actually, it works fine and the calculator you posted put me right where I should be. I was trying to use the SpeedCal Ratio Table from the internet along with your posting info and that confused me. Read ya later, Nick
  20. Tremeck 3650 and SpeedCal ER

    Stick Transmission Swaps
    It turns out I had the standard range Speed Cal. Thanks again. Read ya later, Nick
1-20 of 185 Results
Top