130amp conversion
1 - 5 of 5 Posts
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
1989 SC engine rebuild - horror story - please help
Engine - 3.8L & 4.2LOkay, so I am pleading ignorance, and I am needing help figuring out just what I need to do to go forward. I had the 1989 SC engine block bored .030", decked the block, milled heads, valve job, new cam bearings, and had them assemble .030" pistons on the rods. The mains were .010" as were the...- 3
- 302
-
VMM Smoked!
Engine - 3.8L & 4.2LGetting my 89 Cougar XR7 SC back on the road. No brakes and when I hit the brake pedal the VMM smoked. Is there any connection between the VMM and the brakes or was this a coincidence? Does anyone have a pinout for the VMM?- 2
- 264
-
Green vacuum line
Engine - 3.8L & 4.2LSo im not sure what the f*&^ the green vaccume line that comes off the egr valve go. Mine broke removing the eaton m90 to do gaskets. Found it under the car. I have a suspicion that it was previosly broken as there was gaf tape on the line. Where does the other end go so i can get a new line ran?- 6
- 306
-
Throttle acting strange
Engine - 3.8L & 4.2LHi everyone, I have a little problem. Not me, but the Cougar. Well, I do have problems... actually my problems have problems, but that is another story. After I got my cats replaced and the car is running pretty normal, I found that I have an issue where the throttle is not dropping down...- 7
- 289
-
white lincoln · updated
-
97 cougar 3.8 start up issue
Engine - 3.8L & 4.2Lhey guys looking for some advice. my stepdad got a 97 cougar with 3.8 motor. couple months ago it began to take longer for the fuel pressure to build up in order to start the motor. this has been getting worse and taking longer to build up as time goes by. he installed a new fuel pump on that...- 28
- 1K
-
jtavares0701 · updated
Join now to ask and comment!