TCCoA Forums banner
1 - 4 of 5 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
This is the evo valve or power steering pressure switch or whatever it is called, but plugs into my power steering pump, the plug broke off of the end when I try to plug it back in it falls right back off, my question is can I glue the plug back to the sensor or switch or evo valve whatever it’s called as long as the metal prongs on the plug makes contact with the place they broke off from????
 

Attachments

· Registered
Joined
·
22 Posts
Discussion Starter · #3 ·
Yes, just don't get any on the pins or contacts. Use hitemp rtv, it wont cookoff, like most glues will. That stuff gets pretty hot.
Thanks for the info, id just replace it if I could just find the part, when I look on autozone and advanced auto parts I can’t find any power steering pressure switch for my 2002 Crown Victoria lx,,???? I really need the plug replaced in the picture also, can anyone find the switch itself and the plug in the picture?????
 

· Registered
Joined
·
22 Posts
Discussion Starter · #4 ·
So I went to the junk yard and I got underneath every single crown Victoria grand marquis and Lincoln tc out of 3-2002’s same as mine none even had this part located on the power steering pump, an 2005 didn’t have one and the Lincoln didn’t either, everyone of the cars had the plug but only a 98 model had this part,,,??? Which it was broken also, so I don’t know if someone put a different year power steering pump in my car or if it even needs to be hooked back up????
 
1 - 4 of 5 Posts
Top