TCCoA Forums banner

1 - 6 of 6 Posts

·
MAMN12 Posse Member
Joined
·
2,903 Posts
Discussion Starter #1
Before I get the car repainted, I want to swap to the 96/7 style handles. After going through the swap article for it, here's my only question. Do I need an all new lock-set to do this?...or will my existing lock cylinders work with the new style handle? Thanks.
 

·
Registered
Joined
·
321 Posts
JeffTBird93 said:
Before I get the car repainted, I want to swap to the 96/7 style handles. After going through the swap article for it, here's my only question. Do I need an all new lock-set to do this?...or will my existing lock cylinders work with the new style handle? Thanks.
No, you will need new locks because the locks fit inside the handle with the '96-'97.
According to OEMfordparts.com the set is still available and the part number is F6SZ-6322050-A for the unlighted lockset.
 

·
Registered
Joined
·
321 Posts
JR Tigerstar said:
Are new door handles still available from Ford?
According to OEMfordparts.com they are. F6SZ-6322404-H and F6SZ-6322405-H. Those numbers are for black. Other colors may also be available, but I don't know the numbers. They come pre-painted.

Mike Donley
 

·
Registered
Joined
·
321 Posts
speed95 said:
Is there a big difference in the way the handles look from the 95 to the 96/97?
'89-'95

'96-'97


Mike Donley
 
1 - 6 of 6 Posts
Top