TCCoA Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
283 Posts
Discussion Starter #1
Thanks to instrumentation tech skills at work, I figured I give my dash some dinner climate control lol... So I had a therm controller and a 12dc fan to cut on if and when the heat behind the stereo bezel get too warm...
42708
 

·
Super Moderator
Joined
·
11,097 Posts
I put a plexiglass shroud and 6" fan I bought surplus to keep the amp cool.
Nothing pisses me off more than the amp shutting down due to temperature.
 
  • Like
Reactions: Muscle&Thunder

·
Registered
Joined
·
283 Posts
Discussion Starter #3
Just finished running the last leads within my main interest in mods to the stereo area. Ran switched 12v power to the temp controller, and a lead from the controller to the fan. Out rare earth magnets behind the fan to keep it in place. I used wire loom to make everything look neat under the shifter panel bezel. I made a expansion circuit from the yellow wire that will be off of a switch that will control a future device. Just have to do a full check of the radio and I can button everything up.
42799
42800
42801
42798
 
1 - 3 of 3 Posts
Top