TCCoA Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
2,565 Posts
Discussion Starter #1
I've got quite a collection of MN12 parts growing in my garage that I'm not likely to ever use, so I figured I'd post 'em up here and see if anyone needs them. Plus, most of these are heavy and/or big and I really don't want to ship them. So here's what I've got:

Aluminum 4.10 TL pumpkin - 0 miles on rebuild ($500)
Aluminum 3.27 open pumpkin - about 75K on it ($100)
Iron 3.08 open pumpkin - About 65K on it, free to whoever needs it
Silver SC sideskirts - I don't have the mounting pieces or the door trim ($50)
'99 Crown Vic 4R70W - JModded and retrofitted to work with 94-95 MN12s. Less than 7K on this tranny. Has new MLPS, TCC solenoid, and EPC solenoid. ($600)
Marauder torque converter and '98 Mark VIII flexplate - Everything you need to install, higher stall than normal and a good upgrade for the price. ($150)
Diablo chip for 94/95 V8 MN12s - Burned for firmer shifts and 02 GT MAF transfer function. ($80)
'99 Crown Vic torque converter - I don't know if this is any better than stock, but it's only 5K on it if someone needs a replacement or something. This one's free to whoever needs it.
Black steel wheels w/ 2 winter tires and 2 all seasons - I used these last winter and they work pretty well, put the winter tires on the rear of course. ($150)
'94 console top - It's painted gunmetal, it's free to whoever needs it.
'94 4.6L V8 - 80K on the motor, no problems when pulled for swap. Doesn't include PS pump. ($250)
18" PCW-MOMO wheels, gunmetal gray - no center caps. ($375)

Maybe you guys can use some of this stuff and help me clear a little room in my garage! :D
 

·
motor city poster
Joined
·
2,029 Posts
hey steve... i call first dibs on that 4:10track lok pumpkin, it will take me about a week to see if i can actually buy it, so if you dont mind, could you wait about a week for a response??

if i dont buy that one, i might pick up that other aluminum diff, im in an auto college and my next class is rear axles, so i was thinking of setting my self up a new dif.

either way, ill let you know buy sunday the 18th
 

·
One And Only!
Joined
·
1,712 Posts
Diablo chip for 94/95 V8 MN12s - Burned for firmer shifts and 02 GT MAF transfer function. ($80)

will that work in my car?
tells u how much i know
can i get it reburned
let me know
pm me
 

·
Registered
Joined
·
20 Posts
Hey Miki, you can use it, but it will have to be re-coded for your computer. Any performance shop with SCT/Diablo software should be able to do it for you. Livernois comes to mind.
 

·
Registered
Joined
·
2,176 Posts
Livernois isn't a bad place to have a chip reburned and that but they are kinda on the pricey side. If you end up doing that Miki let me know I can try to talk to someone on getting a price for ya.
Blowaway did you call there yet and talk to Brad about your chip?
 

·
One And Only!
Joined
·
1,712 Posts
yeah im going to get it from steve
but not right now
but when i get it i will have it set up for my car
thnx guys
p.s let me know about price for it ;)
 

·
Moderator
Joined
·
8,239 Posts
brian can reburn that chip for cheaper than livernous.

Would you mind sending me some pics of the wheels to productsolutions at gmail dot com?

Any rash on them?

Thanks,
Justin
 

·
motor city poster
Joined
·
2,029 Posts
steve, go ahead and try to sell those diffs, not nearly enough money in the budget right now and there wont be a for a while,

thanks though..
 

·
Registered
Joined
·
1,040 Posts
Hey, what else would I need to make those 4.10's work? A new Drive Shaft?
Where can I find one, and what should I pay?
If I buy it off of you, could we install it at your house? I'll buy lunch :D !
I figure I need new gears sooner or later, why not buy it now, seeing as how I have no idea what I want to do for an engine!
Who rebuilt them for ya?

Thanks again!
 

·
Registered
Joined
·
204 Posts
SloMo228

I did not see this posted until now. I am thinking that you & I worked things out after you posted this for me to get the tranny and a TC for $600. Do I still get the j-modded tranny & the Crown Vic TC? I'm not mad or anything, just checking....

Thanks

Doug
 
1 - 11 of 11 Posts
Top