TCCoA Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
I'm trying to work on a car that has a broken spark plug. The entire core pulled out of it and then the hex part came off too. The only thing I can think of is trying to get a bolt extractor in it. Anybody have any suggestions?
 

·
Registered
Joined
·
67 Posts
Have the piston down in the hole a few inches, then a proper sized "easy out" should take the threaded body of the plug out easily. Good luck, John
 

·
Registered
Joined
·
480 Posts
AzBlackBird said:
Have the piston down in the hole a few inches, then a proper sized "easy out" should take the threaded body of the plug out easily. Good luck, John

yea like he said, go with a easy out. if the hex head is gone, just hope you dont get any of the ceramic in the cylinders:leftright i know that sheite sucks.
 
1 - 4 of 4 Posts
Top