TCCoA Forums banner

Status
Not open for further replies.
1 - 20 of 27 Posts

·
Registered
Joined
·
501 Posts
Discussion Starter #1 (Edited)
Prices are negotiable within reason.
If you really want the part(s) and can afford them please make your best offer so we can hopefully make the deal on the 1st shot. No "dibs", if you want it, buy it or make the offer. I'm going to do something a little unconventional here... Prices listed do not include shipping costs. If you believe you would like to have your parts shipped to you please do your diligence and qualify your shipping costs. All parts will be shipped from Maryland zip code 21228.
No offence, but it's difficult to answer a high volume of PMs stating "Interesting in ________ shipped to ________" and then never hear back. I know your shipping quote will likely not be what it actually will cost down to the dollar, but if you're interested in a part and your shipping quote comes back as $100 and you don't want to pay that for shipping you would know in advance you don't need to make the inquiry. If shipping is not acceptable at $100, its probably not acceptable at $80 either. If it's acceptable, than $120 for actual shipping isn't going to be a deal breaker. If you look it up and it's on the edge of what you were thinking than please feel free to make your offer with that info in mind. Not trying to be lazy, just trying to filter inquiries to serious buyer. Thank you for understanding.

Please read descriptions 100%. Thanks for looking and for your consideration...

$300 - 1996/97 headlight conversion (sold as set only) includes FORD OEM headlights (NOT repolished - original Ford NOS crystal clear left & right), includes aftermarket clear corner lights and USED 1996/97 mercury cougar header panel.

$250 - 1996/97 "R" style cowl hood by Fiber Concepts. Finished both sides, NON-ram air style. In my opinion, it fits "good" but I think it sits a little high in driver's corner.

$250 - Custom deck lid. Trunk lock eliminated ("shaved") and welded closed. Body work finished and decklid repainted.

*** $800 *** - FULL automatic to manual transmission conversion set. (Sold as COMPLETE SET ONLY, less transmission). Includes 1994/95 Ford manual console, e-brake set up, complete manual pedal set up w/ footrest, and steering column (for neutral safety switch and key release). This will convert your automatic to manual as it were built from the factory with Ford parts (used parts).

*** $200 (price firm) *** - NEW FORD NOS non-traction assist ABS computer (located under passenger fender) - Discontinued from Ford, purchased new from Ford, never used.

$125 - Used Ford fuel tank for MN12 and Mark VIII LSC dual exhaust. Has factory baffles and allows the addition of full length dual exhaust.

SOLD - HnR lowering springs (front and back set)

*** $500 *** NEW unused Ford NOS belt moldings and glass trim. Discontinued from Ford

$125 - 1994 SC (manual car) front anti-sway bar. It's the fat one, BEEFY!

$200 - 1994 Supercoupe airbag.

$150 - Autometer guage pod. Includes BOOST, VOLTS, & FUEL PRESS gauges, mounting panel, and full wiring pigtails.

$175 - Roof line delete moldings. This is hard to describe. I have a collection of moldings pulled from the appropriate years Mercury cougar and Mark VIII LSC to trim the windshield individually and then "fill" the roof seam channels with flush fit paintable moldings. This rids the Thunderbird of the charcoal roof line moldings. Custom trimming of the rear windshield molding will be required. Other minor mods may be needed, this was going to be a custom touch I did to my car to set it apart by welding in these moldings to the roof line with body work to "shave" the roof moldings all together.

$500 - SN95 hub & COBRA brake conversion set. Includes front and rear Cobra breaks. Includes rotors that have surface rust (under 1000 miles on them), brake pads, OEM calipers (Mach 1 - same as Cobra but do not say "Cobra"), relocation brackets, used replacement soft brake lines (also under 1000 mi.), and all 4 hub & bearing assemblies (unbolted with rear knuckles). Sold complete.

I'll also be listing many of these parts on CL in my area, especially large parts and parts that also fit mustang.

<a href="http://s12.photobucket.com/user/mercury267/media/TruckViews022.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/TruckViews022.jpg" border="0" alt=" photo TruckViews022.jpg"/></a>
<a href="http://s12.photobucket.com/user/mercury267/media/20140423_175605_zpse180aa4a.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/20140423_175605_zpse180aa4a.jpg" border="0" alt=" photo 20140423_175605_zpse180aa4a.jpg"/></a>
<a href="http://s12.photobucket.com/user/mercury267/media/20140423_175552_zps6a90fb2b.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/20140423_175552_zps6a90fb2b.jpg" border="0" alt=" photo 20140423_175552_zps6a90fb2b.jpg"/></a>

<a href="http://s12.photobucket.com/user/mercury267/media/CobraWheel_03_zps1ab8f1be.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/CobraWheel_03_zps1ab8f1be.jpg" border="0" alt=" photo CobraWheel_03_zps1ab8f1be.jpg"/></a>


<a href="http://s12.photobucket.com/user/mercury267/media/GaugeDash.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/GaugeDash.jpg" border="0" alt=" photo GaugeDash.jpg"/></a>
<a href="http://s12.photobucket.com/user/mercury267/media/20140423_175410_zps49faa91b.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/20140423_175410_zps49faa91b.jpg" border="0" alt=" photo 20140423_175410_zps49faa91b.jpg"/></a>
<a href="http://s12.photobucket.com/user/mercury267/media/20140423_175418_zps3d8bddea.jpg.html" target="_blank"><img src="http://i12.photobucket.com/albums/a220/mercury267/20140423_175418_zps3d8bddea.jpg" border="0" alt=" photo 20140423_175418_zps3d8bddea.jpg"/></a>
 

·
Registered
Joined
·
22 Posts
shipped price on spring to 46342? and a price on the bilsteins if there for sale. thanks
 

·
Registered
Joined
·
501 Posts
Discussion Starter #4
Is their anyway to tell if the gas tank is clean inside and does it come with pump also?If so price shipped to 75126
That's one of the items I need to inventory and grab shots of. I'll inspect it with a fine toothed comb and post. No pump - just the tank. It was dry and clean with the visual inspection when I got it but I'll take pics of the quality that you can see condition for yourself. Thank you
 

·
Registered
Joined
·
5,417 Posts
I asked this last time you were parting this car, but I'll ask again. Do you still have the driver's side mirror with the gauges in it? and if so what would you want for it?
 

·
Registered
Joined
·
501 Posts
Discussion Starter #8
shipped price on spring to 46342? and a price on the bilsteins if there for sale. thanks
Wow... shipping costs are pretty bad these days.

Based on a box that measures 24 X 24 X 18 up to 30lbs (4 HnR springs)

FedEx $62.38
USPS Priority 3 day $38.90
 

·
Registered
Joined
·
501 Posts
Discussion Starter #9
I asked this last time you were parting this car, but I'll ask again. Do you still have the driver's side mirror with the gauges in it? and if so what would you want for it?
I templated for the gauges in the driver's mirror location but never completed. I have a full and partial mirror housing stripped of its guts, a plexi hard template and the 2 guages but I do not have a completed "bolt on" ready finished product to sell.

The closest thing I could do is sell you the 2 gauges I was going to use, presuming they are even the gauges you'd want mounted in your mirror housing. They are in "new unused open box" condition. I'd have to check what gauges they were. I'd throw in whatever parts I had when I started to build this for your reference but essentially you'd be making it yourself.

The issue I hadn't thought my way through yet was that the plate the gauges mounted to needed to be removable so the gauges could be taken out to replace bulbs or replaced if damaged, but either water tight (challenging) so I could wash the car without worry. I felt some kind of drain holes should be present also.
 

·
Registered
Joined
·
501 Posts
Discussion Starter #11
also interested in the springs and front struts and maybe hood can possibly pick up
I wouldn't buy the front struts off the car. They were replaced with a realignment I had on the car about 8 or so years ago. There was only about 1000 miles put on the car before the head gasket blew but those struts haven't moved since then. I don't know that I'd put them on any car I was shopping for parts for. Just my honest opinion. If you pick up the hood, bring some tools, you can pop them off the car and have them and make your own judgment as to whether or not you want to use them.

Where in PA are you?
 

·
Registered
Joined
·
22 Posts
Pm Sent On Springs.
 

·
Registered
Joined
·
501 Posts
Discussion Starter #16
I think what I'm going to do here, since there are so many items and images needed, I'm going to start by breaking out the "conversion" pieces, or items being sold in "complete sets" into individual threads. I'm hoping this will make it easier for everyone to find what they're looking for.

It may take me a little time since I'm out of town this weekend, but I'll continue with replies and images in the mean time.
 

·
Super Moderator
Joined
·
12,248 Posts
sad to see this bird go, it was the inspiration for mine

+1

I always liked your car.

If you've already said, please point me to the post. But, what brought you to the point where you want or need to part the car out? I'd love to hear the story of your car. Those rims are incredible! If I had the free cash I'd jump all over them. I've always had my eye on them too because they're just like the OEM TBird salad shooters - only BETTER!

I think what I'm going to do here, since there are so many items and images needed, I'm going to start by breaking out the "conversion" pieces, or items being sold in "complete sets" into individual threads. I'm hoping this will make it easier for everyone to find what they're looking for.

It may take me a little time since I'm out of town this weekend, but I'll continue with replies and images in the mean time.
Yes, I think starting separate sale threads will help keep things from getting to confusing.
 

·
Registered
Joined
·
94 Posts
I swear im going to buy that headlight conversion and r hood soon..:/
 

·
Is something burning?..
Joined
·
712 Posts
I'm with ogbird95. I always liked how sleek it looked. This was the first actually modified T-Bird I saw when I looked up "95 LX T-Bird" on Google. So, it was kind of an inspiration to my project as well.

BTW, dislike the look of the Ram Air hood too. It just looks too fake. The Cobra R looks gorgeous.
Good luck with all of this.
 
1 - 20 of 27 Posts
Status
Not open for further replies.
Top