TCCoA Forums banner

custom center cap decals.

29K views 108 replies 31 participants last post by  Ericv8thunderbird 
#1 ·
If anybody is interested I can make custom center cap decals to make your aftermarket wheels look a little more OEM or personalized.

$12.00 shipped first class mail or $15.00 shipped priority mail for 4 decals.

Just let me know the size and color combination, I'll do a computer rendered mock up for your approval and once I get the OK I'll cut, assemble and ship them to you.

Below is some decals that I made for my car that are black and chrome and some decals for my friends SC in black and silver.

The texture is from the application tape, the actual vinyl is glossy unless you want matte finish.





 
See less See more
3
#3 ·
not a problem, just let me know and I'll make them up.
 
#4 ·
like these?

 
  • Like
Reactions: RalphP
#5 ·
Tbird emblem and ill buy
 
#6 ·
When I get home tonight I'll make some up and post a picture.

Heres a quick rendering.

This is 2.5" and the bird is 2.25"

The white will be silver or chrome, which ever you prefer.

 
#12 · (Edited)
One set like this and one set with the Yamaha tuning fork logo. Silver or chrome on black for both.

LMK and I'll make the PP happen.

Thanks!
 
#7 ·
In for the thunderbird wing logo.
 
#8 ·
anybody that wants these just PM me with the size, color combo and logo you want and I'll reply with a pic and my paypal address.
 
#10 ·
the best I can do for the T-Bird logo is this.

I tried with the black inserts, but its to fine to cut out.

 
#11 ·
ok, here is 2.20" black with chrome T-Bird emblems.

 
#15 ·
#13 ·
sorry for the delay, I cant do the lines inside the T-Bird logo if it's below 4" wide.
I can do the solid T-Bird logo in the smaller sizes if wanted.

Is this the yamaha logo you were looking for

 
#18 ·
like this?
 
#16 · (Edited by Moderator)
I got my in and installed them. they look great cant even tell they are aftermarket. would and will buy more!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



 
#17 ·
Yes on the tuning fork, yes on the bird w/o lines. Was that last cap black and silver?

PM me or email to cgatesatmedousadotcom.
 
#20 · (Edited)
If you can mock up a good set for my Lincoln LSC, I'd like them to say "LSC".
Sorta like the "SC" ones you have pictured above. Black and Chrome 2.25 inches!

Like the bottom Emblem in this pic:

Thank You!
 
#21 ·
like this good?
 
#22 ·
FREE BUMP! These Center Cap Stickers Are The SHNITS!

This is my 1995 Mark VIII LSC with these new center cap logos (sorry it's dirty - I DO live on a dirt road):


Here is a close-up of the new logos:


That match the car emblem!
 
#25 ·
bare with me on the iTrader thing, I'm trying to figure it out.

oh.. and BUMP!
 
#27 ·


The finished product.

Thank you
 
#34 ·
5" wing tip to wing tip.

7/16" top of head to bottom of feet.

:)
I'll send you a set to see if its the right size. what color would you like?
the best I can do for the T-Bird logo is this.

I tried with the black inserts, but its to fine to cut out.

If you're able to do just the bird inserts like the bird in this pic I'm in! Silver or chrome whichever is easiest for you. My fan blades are off getting powder coated black and I think this would add a great touch.

That solid bird emblem looks sweet. Have you tried making them into the emblems that go on the front fenders where the V8 emblem is? I'd be interested in a set of those too!

great work!
Travis
 
#30 ·
I could do it, I just can't find one of my old center caps to measure.
 
#31 ·
Have you considered trying to fill the recessed T-bird with an insert in the many plastic T-Bird "Fan" wheel centers that also fit sport wheels, etc?
I could do it, I just can't find one of my old center caps to measure.
5" wing tip to wing tip.

7/16" top of head to bottom of feet.

:)
 
#35 · (Edited by Moderator)
Just the emblem or with a square box around it and maybe the V8 above it?

I can make the solid bird emblem down to about 1" long.

If anybody has any ideas for something custom to be made just shoot it out there.

I can make stuff like this:



The white parts are open, so if you stick it to a red car the white would be the color red of the car.

These are 2.5" X 1.125" and this is only a computer rendering. The actual product would be much smoother.
 
#36 ·
just the emblem or with a square box around it and maybe the V8 above it?

I can make the solid bird emblem down to about 1" long.

If anybody has any ideas for something custom to be made just shoot it out there.
just the solid bird emblem. I don't know why but I love the look of it over the stock emblem on the back of my 95.

sending you a pm. thanks for the rendering too. those look fantastic as well.
Travis
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top