Joined
·
7 Posts
does any body know what the resistance (value) is across the ect so I can check for damage
ect ohm value 4.6L
Join the discussion
Recommended Reading
-
'96 thunderbird 4.6
Engine - 4.6L & 5.4LI'm trying to drain the coolant to change temperature sensor, sender and thermostat. I have unscrewed the petcock almost an inch and only getting drops of coolant. It won't unscrew anymore. Any suggestions?- 6
- 157
-
mikepeace · updated
-
P1443
Engine - 4.6L & 5.4LOkay, so two years ago I got the P1443 and replaced all the evap hoses with fuel line and both electrical parts. I should say, all but one hose, the one closest to the fuel tank. I was pretty sure I could get that one off, but not sure at all I could get a new hose on there because it looked...- 16
- 364
-
T6Rocket · updated
-
Motor Swap Issues
Engine - 4.6L & 5.4LHey guys, it has been quite a while but it's good to be back! I am in need of some guidance regarding a recent engine swap in my 97 bird. The back story: It has been quite a while since I have posted, mostly due to the fact that my motor exploded roughly 6 years ago. Since then the car has...- 44
- 2K
-
mrwiggles2004 · updated
-
96 4.6l Thunderbird, intermittent problem.
Engine - 4.6L & 5.4LI've got an issue I've been working on on the Tbird for the entire time I've had the car; and I know it's a wiring issue somewhere. I've swapped a bunch of stuff, but can't find it. I have all the drawings, datalogging, electronic skills, everything I should need. The problem is it runs rough...- 7
- 237
-
Grog6 · updated
-
Lowering subframe procedure
Engine - 4.6L & 5.4LHey guys, I'm giving changing my motor mounts another try, and instead of going through the torture that removing the mount+bracket out of a 2x2 inch space was, I was wondering about the service manual's procedure for changing them. The one thing I wasn't sure about was that it instructs you...- 12
- 586
-
V22 · updated
Join now to ask and comment!