TCCoA Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1,136 Posts
Discussion Starter #1
THUNDER BIRD / COUGAR / LINCOLN MK VIII……….Parts Lists…………….1983 to 1997*


Front Suspension Components

1983 to 1988

KBP-47040…………………Caster Plus Plates………………….$169.00
KBP-49615…………………K-Member…………………………...$629.00
KBP-49621…………………Front Lower Arms……street………$499.00
KBP-49625…………………Front Lower Arms……comp………$599.00
KBP-49605…………………Lower Chassis Brace for K-memb. $79.00

SPRINGS
1983-1988

KBP-85131……………….Front Springs(sold each)………………$69.50ea
KBP-28000……………….Spring Spacers(2 sets req.)…………...$21.00set
KBP-49001……………….Track Kit Axle Brackets(w/stock spring$104.00

SPRINGS
1989-1997 T-Bird / Cougar
EIB-3524140…………………Eibach Spring Kit (4)…………………$329.00

SHOCKS / STRUTS
1983-1988

BIL-V364138……………….Bilstein Struts(with spring kit)…………..$273.00 each
KON-87421121 SPA……….Koni DA Struts…………………………..$350.00 each

COIL OVER KITS 1983-1988

KBP-49630…………………Bilstein Strut Kit…………………………..$237.00
KBP-49635…………………Koni Strut Kit……………………………...$237.00
Call for Spring Rate recommendations

1989-1997 T-Bird/Cougar

Front Struts……KON-86411209 SPT….cartridge only……………….$160.00 each

Rear Shocks….KON-80411202 SPT…..Rear Shocks………………..$156.00each

STRUT TOWER BRACES
1986-1988
KBP-29901B…..Stock/GT40/COBRA Intake……………………………$149.00
KBP-29002B……Large Intakes(Trick Flow /Edelbrock………………...$159.00

1989-1997
KBP-27101B……………89-95 SuperCoupe SC V6…………………….$149.00
KBP-27103B……………91-93 5.0 Litre………………………………….$149.00
KBP-27201B……………94-97 4.6 2v…………………………………..$149.00
CHASSIS SUPPORT ITEMS
83-88 T-Bird / Cougar
KBP-27004SPR……………….Super Sub Subframes………………………………..$139.00
KBP-28009…………………… Jacking Rails…………………………………………..$49.00

1989 to 1997 All
KBP-27105Z……………………Lower Engine Support………………………………..$129.00
KBP-27106Z……………………Front Suspension Support………………………… ..$69.00
KBP-27115Z……………………Rear Torsional Load Brace…………………………..$69.00

MISC. Items:1983 to 1988
KBP-39003……………………..Super Street Cage……………………………………..$579.00
KBP-49060……………………..T-56 Trans Brakt.(use with KBP-27004SPR)……….$269.00

BUSHINGS
KBP-87001……………………..IRS Urethane 89-97……………………………………$49.00pr.
KBP-87001CSR……………….IRS Aluminum Bushings(Adjustable)………………….$69.00 set
KBP-80003……………………..Steering Rack(standard)………………………………..$20.95set
KBP-80004……………………..Steering Rack (offset)……83-97………………………..$20.95set.
Front Sway Bar………………………………………………………………………………..CALL

Stainless Brake Line Kits
KBP-70223DOT……………………..94-97 Made to Order………………………………..$175.00
KBP-70226DOT……………………..89-92 Made to Order………………………………...$195.00

REAR CONTROL ARMS…..1983-1988
KBP-27051……………………………Adj.Upper Control Arms (street)……………………. $209.00
KBP-27061……………………………Adj. Lower Control Arms……………………………...$ N/A *
KBP-27160……………………………Non-Adj. Lower Arms…………………………………$219.00

*KBP-27061 are Obsolete, If reproduced pricing will be affected.
For current pricing and availability, please call.

Pricing subject to change without notice
More parts are available. If you do not see something,please call.


Kevin Fry
Thunderbird / Cougar parts manager
Kenny Brown Performance
57 D Gasoline Alley
Indianapolis, IN. 46222


Just got off the phone with them.
 

·
Registered
Joined
·
9,966 Posts
I shot a few emails back and forth to Kevin Fry today...I really think its a good idea to support them and get them while they are here. Im going to get the FSSB in a few weeks.

joseph
 

·
Registered
Joined
·
1,136 Posts
Discussion Starter #3
I spoke with Kevin and David, they are both very helpful, I wouldn't wait long on the FSSB, they may still keep the parts, but we need to get the orders for them to keep the parts. Good luck!
 

·
Registered
Joined
·
1,136 Posts
Discussion Starter #5
Just got my parts today, and they look sweeeet. Can't wait to get the cams, stb, rtlb all in. BTW I didn't get the cams from KB
 

·
Registered
Joined
·
168 Posts
Got a note from Kevin Fry today concerning the future of parts for us...he said...
The Strut Braces are at the Powder coaters right now, and we will be able to send out by the weeks end.

If we can get enough interest on these parts, then they will not disappear. Kenny has given me a chance to revive these, now all I have to do is run with it.
...the opinion seems to be that JL's parts are superior...I don't doubt it but that doesn't matter if they're not available. JL is apparently not in the business of making chassis braces (like RM and intake tubes!) or else he'd have posted a place to order them up.
Just curious if this might be worth organising a Group Purchase...we could help promote continued production and very likely could wrangle a better discount in the process.
Any interest?

DR:cool:
 

·
Registered
Joined
·
9,966 Posts
DRROVER said:
Got a note from Kevin Fry today concerning the future of parts for us...he said...


...the opinion seems to be that JL's parts are superior...I don't doubt it but that doesn't matter if they're not available. JL is apparently not in the business of making chassis braces (like RM and intake tubes!) or else he'd have posted a place to order them up.
Just curious if this might be worth organising a Group Purchase...we could help promote continued production and very likely could wrangle a better discount in the process.
Any interest?

DR:cool:
Ive been in contact with Kevin quite a bit in the past few months. My money for his FSSB is going out on friday and Ill be getting SS brake lines from him also. I got my RTLB from KB and thier customer service is great.

joseph
 

·
High-Mileage 4.6L Thrasher
Joined
·
3,232 Posts
DRROVER said:
Got a note from Kevin Fry today concerning the future of parts for us...he said...


...the opinion seems to be that JL's parts are superior...I don't doubt it but that doesn't matter if they're not available. JL is apparently not in the business of making chassis braces (like RM and intake tubes!) or else he'd have posted a place to order them up.
Just curious if this might be worth organising a Group Purchase...we could help promote continued production and very likely could wrangle a better discount in the process.
Any interest?

DR:cool:
I'm taking orders for parts now,and I've been shipping the completed orders since last week too-just not the front STB.To make a front STB that is worth having is very time consuming,and I'm limited on time with a family, a day-job, and a car of my own to mod/race.
JL
 

·
Registered
Joined
·
168 Posts
Bumpity-bump, bump!
See Group Purchase underway...
 
1 - 10 of 10 Posts
Top