Been wanting to try this so-called oil pressure gauge mod.
Based on Lonnie's tech article.
10mm and 7mm sockets
There are 2 senders you can choose from:
Standard Motor Products: PS-60 Echlin: OP6091
I figured I'd make this guide after gettin a wiper switch from my local junkyard that didnt quite work today, I decided to open it up and i found the signal light contacts were corroded.I'll show you how to fix this along with another problem, a broken wire.
Here are some removal & installation...
1994 through 1995 4.6L Engines will burn oil, it is in their nature. The valve guide seals were a bad design and will wear out before 100,000 miles. Engines will run fine otherwise.
1996 and 1997 4.6L Cars, Look behind the alternator,if you see black plastic directly behind it, you have the...
Well since my article disapeared when MTC shut down I recreated it as a web page
All the photos are hyperlinked to fullsize versions. At some point can we get this transitioned to the tech articles so I don't have to eat up my webspace?
88-96 PBR Corvette caliper and brackets
88-96 Corvette brake pads
13" Cobra rotors (drilled to 4.25 bolt pattern)
Have to have 17" or higher rims
Open the spindle to bracket holes a couple millimeters (used a round file) so that the new bracket bolts will fit.
You need to buy...
A forum community dedicated to Ford Thunderbird, Mercury Cougar and Lincoln Mark owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance, and more!