TCCoA Forums banner

1 - 20 of 42 Posts

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #1 (Edited)
I just reorganized the garage today, and I want to try to get rid of as much stuff as I can. Here's a list of what I remember seeing
All prices are or best offer.

-Tbird quarter glass- free pickup or $10 plus shipping
-2 sets of black door panels- free pickup only
-94+ grey dashboard- GONE
-early 80s 351W heads- free pickup only
-Black cloth front SC seats in perfect shape- $200 pickup only
-Black 89 cougar dash, perfect condition- $50 pickup only
-T45 trans, all disassembled. Needs 3-4 shift rod and fork- free pickup only
-Upper plenum and TB off 96/97 4.6- free pickup or $10 plus shipping
-Cam covers for 4.6- free pickup or $10 plus shipping
-Misc black interior trim pieces- free pickup, or just pay shipping for the smaller pieces
-5.0 87-93 mustang intake manifold- free pickup or $10 plus shipping
-5.0 fox body 1-5/8 long-tube headers, black. Don't remember the brand name. Bought them for the 91, but they wouldn't work so I bought a different set- $100 plus shipping
-Teksid block, completely disassembled. Cylinder bores are perfect SOLD!
-4.6 DOHC B-heads. Would probably need to be rebuilt. Come with cams- $125 plus shipping, or $100 pickup
-Mark 8 intake, throttle body, and IMRCs- $30 plus shipping
-8.8 empty iron pumpkin- $10 plus shipping, or free pickup.
-Black Mark8 seatbelts, full set- $75 plus shipping.
-Complete SC motor, pulled from 90XR7. Comes supercharger to oil pan, and includes intercooler tubes. 110K miles. Was overheated a few times cause it was leaking coolant from the tstat housing, so it probably needs head gaskets redone before installing it. I did drive this car before pulling the motor, so I know it doesn't knock or anything like that- $350 pickup only.

I think that's it for now. Let me know if anyone wants any of this stuff. It would be a PITA to have to get a dumpster to throw a bunch of stuff away in.

Mike

NEW STUFF-spent today gutting the 94
-4.6L complete from serp belt to clutch and violin case to oil pan. Includes complete wiring harness, computer, all sensors, etc. Basically everything needed to get a 4.6 running in whatever you want. Would reccomend a rebuild as motor has 215K miles, but motor ran great before I blew up the trans.
-Black leather/cloth tbird LX seats, front and rear. Top of rear seat has some sun fading, but otherwise they are perfect. $100, pickup only
-SC master cylinder, S10 slave, bracket, and hydraulic line for use on T45 or T5 swap. Will also include modified mustang shifter handle with T-handle. Best offer.
-Used Pro50 shifter for T5/T45. Was on my car for a year, and wasn't new when I got it. $50/best offer.
-Steeda Tri-ax shifter for T5/T45. Used for about 2 weeks. $125

NEW STUFF-reorganized today and found some more crap
-94+ cougar center reflector-free pickup or $10+ shipping
-94+ cougar right tail light-free, just pay shipping or pick up
-89-91 tbird tail lights, no center panel-free, just pay shipping or pick up
-94/95 mustang 5.0 intake, upper and lower, same as 91-93 bird, only without ACT sensor-$20 plus shipping
-stock SC intake tube
-SC clutch pedal-$125 plus shipping
-Bracket for 4.6 that goes over alternator and holds plug wires in place-free pickup or $10 plus shipping
 

·
Registered
Joined
·
859 Posts
Sent you a PM.

Thomas
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #4

·
Registered
Joined
·
1,731 Posts
well it looks like I might need the dash as well as all that other stuff in the other post. Now does the 94 have airbags ? both sides if it does? I will probably be picking this stuff up this week so let me know.
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #7
Essex, shipping is $20, so $30 total. You can paypal me at [email protected], or if you want to mail me a check or something it would be
Michael Lehmann
846 Sycamore ave.
Tinton Falls, NJ 07724
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #8
wishkah, the dash in my 94 cougar that I am parting out is junk. It got busted up from airbags blowing too. The airbags themselves are fine cause I replaced them, but one is grey and all scratched up, and the driver's is an SC airbag. The dash I have in my garage is grey, and it isn't perfect, but you are welcome to take it if you want.
 

·
Registered
Joined
·
1,731 Posts
thanks, what about prices on those other parts? I plan to come out there as soon as possible for you and me to get what I can. I will bring the sawzall and grinder lol if you dont mind. I need to get this car going again for as cheap as possible. Thanks again.
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #10
thanks, what about prices on those other parts? I plan to come out there as soon as possible for you and me to get what I can. I will bring the sawzall and grinder lol if you dont mind. I need to get this car going again for as cheap as possible. Thanks again.
Wanna come down on the 4th? Either that or the following sunday (8th) would be the soonest I would be available.
 

·
Registered
Joined
·
1,731 Posts
I can come down on the 4th i will be there at anytime you want me there. let me know about the other fender. I will bring whatever tools I can think of that I might need. PM me with your info and # so I can give you a call when Im leaving that morning. Im trying to find out the location of the modules. but with little luck. I did however find a place that will flash the module to clear the crash data so that it can be used again. Oh I just realized I may also need the ccrm that is located behind the rad support on the passenger side ( black box with like 20 wires that clip into it). Let me know a total price with that (if you have it) and the other fender ( if you have it). Thanks again sooooooooo much, Jon.
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #12
ttt

Also tomorrow I will be stripping my 94 4.6L cougar, so if anyone wants anything off that, let me know.
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #13
TTT, new stuff added.
 

·
Premium Member
Joined
·
1,372 Posts
Do you still have the dash for the 89

Let me know
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #15
Yup, still sitting in my garage. Come and get it.
 

·
Banned
Joined
·
613 Posts
well it looks like I might need the dash as well as all that other stuff in the other post. Now does the 94 have airbags ? both sides if it does? I will probably be picking this stuff up this week so let me know.

good luck with sale. ill try to throw you some bones
 

·
Registered
Joined
·
1,731 Posts
Thanks Mike for all the stuff Im still not sure if I'll use the dash or try to repair mine since it looks like a real pain to replace. I plan to start work tomorrow since its raining right now. I will take lots of pics of the progress I plan to do a 2 tone interior now since I will be putting in a black SC airbag on the steering wheel and the passenger side airbag is grey so I will be painting it black kind of like some of the mustang color combos ive seen .
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #18
The dash isn't that bad to get out. It just looks like more of a daunting task than it actually is. I've done a few of them before, and it took me less than 2 hours to get the dash out of that car yesterday.
 

·
Super Moderator
Joined
·
7,669 Posts
Discussion Starter #20
Let me check my garage and see exactly what pieces I have.
 
1 - 20 of 42 Posts
Top