TCCoA Forums banner

1 - 2 of 2 Posts

·
Moderator, Iowa Chapter Director, Uber Luber, TCCo
Joined
·
8,978 Posts
Discussion Starter #1
I bought it used from someone on the boards. It's not a real big deal, but one of the maf sensor bolts is broken off in the threads. There's about 1/8" sticking out the top. I can grab it with pliers but when I unscrew it, it just spins the threaded sleeve around inside the plastic housing. Any ideas? It's not vital that I get it out it's just my perfectionism annoying me. Thanks.
-Thomas
 

·
Moderator, Iowa Chapter Director, Uber Luber, TCCo
Joined
·
8,978 Posts
Discussion Starter #2
Altright nevermind. I got a good enough grip with a pliers to yank the entire threaded bushing out of the plastic housing with the broken bolt still inside. I took it to this great little shop that has everything threaded, metric standard, all that stuff. They screwed in a self tapping threaded bushing and gave me a bolt for it. Now I've got philips bolts in the sensor :D
-Thomas
 
1 - 2 of 2 Posts
Top