TCCoA Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
284 Posts
Discussion Starter · #1 ·
i have been to several salvage yards and parts stores had no luck. the salvage yards i have seen the drum type of knuckles in the rear i am looking for the type for the calipers. any help i will be glad for the help in getting them thank you
 

·
Registered
Joined
·
836 Posts
I got a set. 65 shipped to your door. Let me know if your interested.
 

·
Registered
Joined
·
144 Posts
i have been to several salvage yards and parts stores had no luck. the salvage yards i have seen the drum type of knuckles in the rear i am looking for the type for the calipers. any help i will be glad for the help in getting them thank you
Hi,
Those knuckles are outrages.Ford has 2 RH and 4 LH left in there stock.Dont pass out or laugh to hard when I tell you these prices.

LH Knuckle $342.79 (retail $519.38)
RH Knuckle $279.84 (retail $424.00):eek:

Thanks
Jason
 

·
Super Moderator
Joined
·
8,298 Posts
Just so you know, you can re-use the drum knuckles on a rear disc swap. There are 2 ears cast into the knuckle where the caliper bracket will bolt. On the disc brake knuckles, these holes are already drilled, but if you are doing a conversion, all you have to do is remove all the drum brake components and backing plate, drill out those 2 holes, and bolt your disc brake parts on to your existing knuckle.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top