TCCoA Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 · (Edited)
I am going to put a 98 mark VIII tranny into my 94 mark VIII. I am trying to research any problems before I start. I know I have to rewire the pins on the main harness as per chapter 16 in Jerry's articles and use the MLPS from the 94 transmission. Is there anything else that needs to be switched between these two transmissions to get it to work properly? Thanks!
 

·
Registered
Joined
·
803 Posts
Better check the solenoid voltages between the years and make sure they are compatible. You may need to swap them from the old trans too.

rm
 
1 - 2 of 2 Posts
Top