[97 30th]

The mount on the rod unscrews and the adapter from SCP goes in place of it. That becomes the lower mount to the control arm. You have to install the bearing in the shock body mount and that then bolts to the the upper adapter.

 

[97 30th]

Like this.

 

[97 30th]

And hopefully after you get them installed they don't leak. I had to replace one because of it. It's a known issue with these. I figure if I have any more issues I'm going to find some better coilover shocks to replace them with. There's plenty of aftermarket shock builders with better quality (and higher price unfortunately) out there.

 

[97 30th]

That may just be from assembly. You'll find out soon enough if they leak since the shaft faces down.