[ry2lazy4u]

I have a 95 4.6/ there is a spot on the rail, valvestem lookin thing where I have attached a tool to measure fuel pressure. can I get a electric sensor to put on there permanently? i'm not running a manual gauge with a fuel line through the firewall. i envision firey a death if I were to do that.:diablo:

 

[TMcColl]

You can get an electronic sender and guage. I have a Nordskpg gauge mounted in my a pillar pod.

Tony

 

[The Great Obucina]

if you have or get an adjustable regulator, they typically have a 1/2 NPT port for a gauge or sender. I have a gauge and 45* elbow of the port on my Aeromotive.

 

[driller]

Most likely need to remove the schrader valve. Then get a 1/16 NPT male x 1/8 NPT female bushing. Most sending units are 1/8 NPT male.

 

[The Great Obucina]

duh, thats right 1/8 NPT.

 

[Silenced]

Sorry, but I've gotta ask an uninformed question. What does NPT stand for?

 

[The Great Obucina]

national pipe thread. standardized tapered pipe thread type......like AN fitting - Army/Navy - standardized fitting types developed during WW2.