[oldude]

To do an EEC self test on a 96 4.6 Tbird using jumper wires and counting flashes on the instrument panel or a test light? I've searched but haven't found an answer. I went to this link http://www.allfordmustangs.com/Detailed/445.shtml I found the large connector but can't find the small STI connector.
Can't take it to autozone, no plates and it will only idle. Dies when you give it any gas.

 

[Rob]

You cant do a self test with jumpers because it is OBD-II. The only connectors that look like that would probably be the ABS diagnostic connector(under the hood), and it doesnt have the smaller STI connector. Your OBD-II connector is on the passenger side under the glove box.
-Rob

 

[oldude]

Thanks Rob