TCCoA Forums banner

1 - 9 of 9 Posts

·
Super Moderator
Joined
·
9,302 Posts
Discussion Starter #1
Price on a left upper control arm for the bird?
 

·
Johnny Bling Bling
Joined
·
3,811 Posts
44.04
 

·
Super Moderator
Joined
·
9,302 Posts
Discussion Starter #3 (Edited)
Also PI Intake swap + 2x Jmod parts

Hm... would the following parts for the PI intake swap plus the aforementioned UCA put me over the $100 threshold for July's free shipping special? If so I'll hold off on ordering until then. Thanks!

PI Intake Manifold Gaskets x2
PI Heater Hose, XR3Z 18B402 AA
PI Water Pump Nipple, F752 8555 AA
Water Pump O-Ring
Fuel injector O-Rings x16

Also two each of the following for the J-mod - doing it to two 97s (if anyone sees that I've left anything out, let me know so I don't find that I'm missing something in the middle of the operation!):

F75Z-7F284-AA 1-2 Accumulator Upper Spring
F4AZ-7F247-A 1-2 Accumulator Retainer Cover
F7AZ-7F251-AA 1-2 Accumulator
F7AZ-7F284-BA 1-2 Accumulator Lower Spring
F7AZ-7H292-BA 2-3 Accumulator
F6AZ-7A098-A Tranny Filter
XW7Z-7D100-AA Separator Gasket
F7AZ-7C155-AA Separator Gasket
 

·
Johnny Bling Bling
Joined
·
3,811 Posts
$325.71 for everything, including the control arm. you might want to invest in the trans pan gasket. technically, they are re-usable, but they do eventually leak. $18 ea(not in qouted price).
 

·
Super Moderator
Joined
·
9,302 Posts
Discussion Starter #5
Thanks for the quote. Since I'll be doing the J-mod for a friend could you let me know how much all those parts cost so I know how much to charge him? I think I'll hold on the gasket for now, and I'll drop you a PM to let you know when I'm ready for everything. Do you still have my info on file?
 

·
Johnny Bling Bling
Joined
·
3,811 Posts
$82.15/JMOD

i have your info.
 

·
Super Moderator
Joined
·
9,302 Posts
Discussion Starter #7
Last minute addition - 180 degree thermostat + o-ring.

C'mon July, I can't wait much longer! :D
 

·
Johnny Bling Bling
Joined
·
3,811 Posts
if you know what you are definately doing, i can get the parts on order, and just ship it in a few days....
 

·
Super Moderator
Joined
·
9,302 Posts
Discussion Starter #9
That sounds good, go ahead and charge it to my account. Is it possible to forward tracking info to me after it's shipped? If not, no biggie.

I'm definitely doing the UCA, PI swap and 2x J-mods; all for 1997 4.6 birds. So I guess the total parts list would be as follows:

1 x Left upper control arm

2 x PI Intake Manifold Gaskets
1 x PI Heater Hose, XR3Z 18B402 AA
1 x PI Water Pump Nipple, F752 8555 AA
1 x Water Pump O-Ring
16 x Fuel injector O-Rings
1 x 180* Thermostat
1 x Thermostat O-ring

2 x F75Z-7F284-AA 1-2 Accumulator Upper Spring
2 x F4AZ-7F247-A 1-2 Accumulator Retainer Cover
2 x F7AZ-7F251-AA 1-2 Accumulator
2 x F7AZ-7F284-BA 1-2 Accumulator Lower Spring
2 x F7AZ-7H292-BA 2-3 Accumulator
2 x F6AZ-7A098-A Tranny Filter
2 x XW7Z-7D100-AA Separator Gasket
2 x F7AZ-7C155-AA Separator Gasket
 
1 - 9 of 9 Posts
Top