TCCoA Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter #1
I had all intentions of going auto but I have changed my mind.

First of all I have a newly rebuilt 4R70W built by Jerry Wroblewski. This tranny has an 03 case with the internals from a 04 4R75w. So it has the 4R75W pump in it, tailshaft lubrication mod, and it has all the upgrades Jerry recommended for my 600 RWHP Kenne Bell mustang. For more info I will have to ask Jerry but I can promise you he built it right. The tranny has never been in the car. I also have a PI tripple disc torque converter newly rebuilt by Circle D.
http://www.circledspecialties.com/
This converter was built pretty tight to allow me to take advantage of my wide torque curve. I would guess it will stall around 3000 RPM.I also have a new in box tranny cooler.
I would like to work a trade for a viper spec t-56 setup for my 99 Mustang.

Rob
 

·
Chapter Director Coordinator
Joined
·
6,253 Posts
do you know what year output shaft he put in it?

if it is 03+ it may not have the splines for our speedo gear
 

·
Refrigerator Raider Hater
Joined
·
11,719 Posts
1 - 5 of 5 Posts
Top