TCCoA Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1,702 Posts
Discussion Starter #1
How hard is the M90 to take apart. The M90 on my AED is eating its oil.....must be a bad seal in between the oild and housing.

Where do I purchase the seals at.

Thanks guys......I figured you SC owners would have a better idea where to find these parts than most people.

Mike
 

·
Registered
Joined
·
201 Posts

·
Registered
Joined
·
13 Posts
I have rebuild kits. The kit contains the seal, 2 bearings (for the snout), a solid coupler, & instructions. I also have the 2 bearings that go in the rear of the case to support the rear of the routers. U can email me at [email protected]
 

·
Registered
Joined
·
166 Posts
AEDM8 I keep all of the parts in the pic below on the shelf.

Originally posted by mannysc far as I know nobody has the center bearings and they are sealed units
Manny...the center bearings (front rotor brgs) are not sealed, they are open.

'bird

 
1 - 7 of 7 Posts
Top