TCCoA Forums banner

1 - 5 of 5 Posts

·
Newbie
Joined
·
5,650 Posts
Discussion Starter #1 (Edited)
I have a set of freshly rebuilt 4.6/5.4 NPI heads, the better F5AE casting. The heads have been cleaned, milled, and were treated to a valve job with new exhaust guides. Here's what you get:

  • Pair of F5AE heads (New Fel-Pro valve stem seals installed; No cams, rockers, or lifters included)
  • 2 Fel-Pro MLS Head Gaskets (9790PT2 & 9792PT2)
  • Head Bolt Set (OEM Ford)
$350 plus shipping to the lower 48.
 

·
Banned
Joined
·
287 Posts
Can't you get PI's for about that same price?
 

·
Registered
Joined
·
975 Posts
Not cleaned, milled, and treated to a valve job with new exhaust guides, not to mention valve stems, head gaskets, and head bolts. Also the NPIs can really fly when ported...

Oh just read the thread about NPI heads here http://forums.tccoa.com/showthread.php?p=1332618

Oh, and this is a really good deal FYI, the head gaskets & bolts themselves are probably close to $100
 

·
Newbie
Joined
·
5,650 Posts
Discussion Starter #5
Can't you get PI's for about that same price?
No, I posted what I have available. Like machausta said, you will have a very hard time finding PI heads (or any 4.6L heads really) with the extras at this price.
 
1 - 5 of 5 Posts
Top