TCCoA Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
138 Posts
Discussion Starter #1
i was wondering does any 1 know a good oil reseviour for the 4.6l motor or does any 1 know any oil tricks when i hit the gas i loose all oil pressur do to the motion it all flows to the back of the pan any inpunt on this would be nice
 

·
Registered
Joined
·
138 Posts
Discussion Starter #5
no my oils not low and i dont burn much if any at all is a bran new motor so..... and a sending unit were do i get 1
 

·
Registered
Joined
·
227 Posts
Since you have a new( by new I imagine you mean rebuilt) engine fresh rebuilds and new ones can use more oil the first 1,00 miles or so untill the rings seat. Also perhaps the person rebuilding the engine might have put the wrong dip stick in and it is showing full when its not. I have never seen a 4.6 with stock oil pan lose oil pressuer due to oil pump starvation doing all kinds of arrest me now manuvers at Moroso park as long as the driver kept the dirty side of the car down.:cool:
 

·
Registered
Joined
·
111 Posts
The oil pickup tube in the pan may not be positioned near the bottom of the oil pan, sucking air when you hammer it and the oil goes to the back of the pan.

Danford1
 
1 - 8 of 8 Posts
Top