TCCoA Forums banner

1 - 20 of 76 Posts

·
Registered
Joined
·
605 Posts
Discussion Starter #1 (Edited)
Let me know if you need any parts.

custom two-tone sc seats (black and grey), rear fold down

Stock LX wheels (fan style)

20" Enkei Kapone wheels with Nitto Extreme zr 245/35/20 tires....Sold

pioneer speakers: (4) 6x8

indiglo gauges

gauge cluster

oem shifter

auto down modular (one push on window window down switch and the window goes all the way down)

2 brand new (never installed) motorcraft O2 sensors-----SOLD

complete engine (every part is available)

engine fan (less then 5k on it, replaced less then a year before stop using the car)

inject chip- raises rpm shift points, removes speed limiter (advance timing) remove octane plug to run 87 gas or keep in and use 93. colder plugs are need (f150 lightining plugs work great!)

headlights

Clear corners-----SOLD

taillights

97 center console (w/ coin holder and cupholders)

All Dash pieces

Flip down cd player(detachable face)..Pioneer. I can find the model number if you need. It is the one that has the automated race cars/snowboarders/etc display on the face, about 3 inches wide.

2 magnaflow mufflers

air filter box (for cone filter)

Pillar Pod------SOLD

Autometer Phatom A/F ratio gauge





Hood, air suspension and gfx-SOLD




 

·
Registered
Joined
·
605 Posts
Discussion Starter #3
I ask myself that all the time....but its just been sitting in the garage for over a year now, I got tired of throwing money at it trying to figure out what was wrong with the engine (shaking at idle (not to mention moved to northern va and I highly doubt it would pass the emissions test) and got tired of fixing stuff all the time on my days off. I'll always keep all the pics I have of it. But its time for it to go. Tried selling it whole, but never got an offer on it, so its being parted out.

And I have my f150 screw that I love!!!
 

·
Street Freekz
Joined
·
754 Posts
How much were you looking to get for the rotors & calipers?

I might take them off your hands when I come down Monday.

(BTW: replied to your email)
 

·
Registered
Joined
·
99 Posts
what about those rims? what is the size? where in va are you im about 40 minutes from va beach ,chesapeake area.
 

·
Registered
Joined
·
680 Posts
I'll take the eec harness (104 pin to bulkhead)
 

·
Registered
Joined
·
123 Posts
how much for the indiglo gauges? Pm me
 

·
Registered
Joined
·
223 Posts
what you want for that hood? is it fiber glass?
 

·
Registered
Joined
·
641 Posts
what about those rims? what is the size? where in va are you im about 40 minutes from va beach ,chesapeake area.
20's. Don't know dimensions but they are 20's. Prolly 20x9
 

·
Registered
Joined
·
680 Posts
I also need the shift cable going to the trans shift selector, it may be part of the entire shifter assembly from inside the the car. I'd like however far the cable goes before it can be detatched, or the entire assembly if it can't be detached.
 

·
Registered
Joined
·
46 Posts
How much for the seats, rotors, calipers?
 

·
Registered
Joined
·
605 Posts
Discussion Starter #16
TTT...


Still have tons of parts:

All interior is still intact (gauges, cluster surround, vents, etc)
Seats
J-chip
auto down window modules (one push windows go all the way down)
parts for motor is still untouched
 

·
Street Freekz
Joined
·
754 Posts
The pics do not do the interior justice; they look amazing (as does the car) if you see it in person. I found the need to drive 6+ hrs to pick up some parts....:D:D

Bump for good, quality parts and great prices. :thumbsup:
 

·
Registered
Joined
·
418 Posts
PM on seats. Price and pics.
Thanks!
Bill
 

·
Registered
Joined
·
605 Posts
Discussion Starter #20
The two people that sent me a message about the center console, please resend. I accidentally deleted your pms. Thanks
 
1 - 20 of 76 Posts
Top