TCCoA Forums banner

1 - 20 of 40 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
Hey all,
I bought a donor for my engine swap and won't need anything off of the rest of the car. I'm just trying to recoup some of the expense for the project, so these will be the perverbal cheap parts. From the pics I've seen, the car seems to be a black rattlecan paint over a rust free body with a decent grey interior.
Let me know what you want and I'll snap pictures of the part and we can discuss prices. I don't care what the parts are worth on the market, I just need to try and offset the cost.

I am using the engine, radiator, trans, driveshaft, coolent overflow and the wiring harnesses for the driveline.
Everything else is up for grabs, so this is your chance to get the parts you need for cheapest prices.

I'll post up general pictures when I get back tonight.
 

·
Registered
Joined
·
410 Posts
Leather or cloth?

One part i could use is the right side A Pillar cover, and the driver's side, side window defrost vent. The little plastic cover that is ontop of the dashboard that points straight at the window near the mirror, mine fell apart, and the junkyards near me don't have many t-birds.
 

·
TCCoA Bachelor Club Pres.
Joined
·
1,267 Posts
I need the whole shifter handle, if it's in good shape, with the OD button wiring harness coming out of it, please!
 

·
Registered
Joined
·
1,916 Posts
I could use the right most HVAC vent on the passenger side if it's not broken. My brother in law broke mine with his knee.
 

Attachments

·
Registered
Joined
·
38 Posts
Discussion Starter #8
Okay, I'll ear mark all those parts.
The pics will have to wait until the morning, Im waiting for the car hauler to get here so by the time I get back it will be too dark to take any decent pics. AndI'll take pictures of all of the parts requested and let the buyer decide if the part is worth the effort.
 

·
Registered
Joined
·
147 Posts
1996 TB Rear PS LED Panel

Do you have a good and 100% lite LED rear PS panel?

Thanks,

Glenn
 

·
Premium Member
Joined
·
360 Posts
Does it have the plastic underpan on the front bumper ? It is the part that covers the underneath radiator and area you have to move it to get out the oil filter, it is attached by a few plastic push-in fasteners. I'm missing that on my tbird. It's probably like .7'X4.5'.

Front license plate holder bracket?

And the gauge cluster bezel, what color and shape is that in?
 

·
Registered
Joined
·
38 Posts
Discussion Starter #14
Hey all,
Sorry to be MIA, but I had my engine finals due, the written was yesterday and the hands-on is today. I haven't been able to get any pics yet, the car is sitting on a hauler in front of the house and I live on a hill. So there are bricks propped up under the wheels of the trailer and I'm too chicken to try and climb up and move stuff.

I will tell you that there are no door panels, left HVAC vent and the interior has been painted. The enter console and alot of the trim is now a two tone blue. I'll get some pics of the exterior and hopefully the car will be taken to the shop tomorrow so I can get some interior pics.

Glenn, can you please explain what the part you need is. lite led panel, tailight on the passenger side?

Kenz, I'll check on the pan, but I don't think the car has a front braket, if it does its yours. The bezel is spoken for but when I post the pics that will be the deciding factor.

Tbirdbob, I don't think it has power seats, but I'l double check for you, if it does, it's yours.

Bulldog, i'm guessing the EEC is the engine electronic controler. If it is, i'm most likely going to use it. If I don't need it, It's yours

Thanks for your patience all, God bless
 

·
Registered
Joined
·
38 Posts
Discussion Starter #17
Hey all, so I snapped some pics, but I can't seem to get them to post, any advice?
 

·
Registered
Joined
·
38 Posts
Discussion Starter #19
So

The shifter seems to be in real good shape.
The gauge bezel has been painted blue, but otherwise seems in good shape.
The PS tail light is busted, as seen in the pic below. The white specks are some weird reflection my phone picked up in each picture, the lenses themselves are fine, except for the broken part.
The seats are manual, but in real good shape. Not car show good, but better than driver quality.
And it does have the pan under the bumper...I think. Ther is a panel with a few cutouts that look factory. The thing runs the entire length of the front end and is firmly attached. There aren't any breaks or damage that I can see, and I looked pretty well.

STEVEG; The vent you are asking for is on top of the dash, looks like a rectangular nostril? And the a pillar is black, but looks good. Problem is, I can't tell if they were painted or if they came that way.

Anyone wanting parts, just make me an offer and we can go from there.

Thanks all, and once the car is at the shop I'll snap any specific pics anyone may want.
 

Attachments

1 - 20 of 40 Posts
Top