PI Head Swap for 4.6's
1 - 4 of 4 Posts
Joined
·
2,028 Posts
Re: Head Swap
As J-Rob said, check the tech articles.
http://www.tccoa.com/articles/engine/index.html#
look for " PI head Install for the 94-97 Ford MN12's " near the bottom of the first list.
Not trying to steal anyone's thunder (no pun intended). Just trying to help out.
As J-Rob said, check the tech articles.
http://www.tccoa.com/articles/engine/index.html#
look for " PI head Install for the 94-97 Ford MN12's " near the bottom of the first list.
Not trying to steal anyone's thunder (no pun intended). Just trying to help out.
Joined
·
863 Posts
Is that video that was posted a little while back showing a head gasket change still around?? It was a usefull vid.
later,
jay
later,
jay
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
P1131 code.. hunting the culprit (4.6L)
Engine - 4.6L & 5.4LFirst I want to say just about everything I’ve fixed so far on our new-to-us T-Bird cane from suggestions, and past posts here. This site has been a huge help! I did read a lot of old posts regarding the code I’m having, but nothing seems to have a solution, nor my exact symptoms.. Since day 1...- 39
- 851
-
ezrarobles · updated
-
Help temp gauge fluctuation and fan has to run to keep cool at idle.
Engine - 4.6L & 5.4LI have a 96’ Cougar when I got it the top Rad hose had a small leak fixed topped off. Now the temp gauge fluctuates constantly and it wants to heat up quickly at idle. I’ve changed the rad the thermostat and pump with no change but I did change the cap and that seemed to help. Even today at 35*...- 6
- 208
-
Fasteddie304 · updated
-
Coolant Change
Engine - 4.6L & 5.4LHey folks, long time no post. Not that I post often... I've noticed my coolant becoming a bit rusty and low. I'd gone into a general repair shop and the guy immediately warned me that it would start a lot of issues to do a coolant flush because my car is so old (96). It's almost as if he was...- 17
- 490
-
Vicinity · updated
-
Cross Breeding the Coyote Crank & Teksid Block
Engine - 4.6L & 5.4LBack in February, I had posted on one of MikeB's threads that I was attempting to mate a Coyote crank into a Teksid block, well it finally came about. The test car was my black with gold 96 Cougar that I took on the Epic Drive. The car had a Mark VIII engine topped with Cobra intake, degreed...- 59
- 6K
-
wildturkey · updated
-
3.8L SC to 4.6L Terminator Swap
Engine - 4.6L & 5.4LI think maybe this might be interesting to a few...and may answer many of my questions. I Broke a piston in my 95 SC recently and stumbled across a good deal on a wrecked 10th Anniv Cobra Convertible. So now the T-Bird has been snake bitten and is morphing into a fire breathing screamer...very...- 473
- 153K
-
Lil Mikey · updated
Join now to ask and comment!