TCCoA Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
342 Posts
Discussion Starter · #1 ·
I have a set of pi heads and I was wondering if these parts would work with them. I only see one little difference and I was wondering if it would matter if I used them anyways. I circled the difference in the parts in red. Thanks in advance for the input and advice.



This is the Pi head

<a href="http://photobucket.com" target="_blank"><img src="http://i39.photobucket.com/albums/e192/Ncryoten/Pi%20heads/Piheads002.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>



This is an Npi head


<a href="http://photobucket.com" target="_blank"><img src="http://i39.photobucket.com/albums/e192/Ncryoten/Pi%20heads/Piheads001.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>


The next 2 pics are the pi heads with the parts I want to use on them.



<a href="http://photobucket.com" target="_blank"><img src="http://i39.photobucket.com/albums/e192/Ncryoten/Pi%20heads/Piheads003.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>





<a href="http://photobucket.com" target="_blank"><img src="http://i39.photobucket.com/albums/e192/Ncryoten/Pi%20heads/Piheads004.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
 

·
Registered
Joined
·
7,758 Posts
To my knowledge you can't "mix and match" the cam caps. They are machined as a unit with the heads.

Hopefully someone will correct me on that if I'm wrong. :thumbsup:
 

·
Registered
Joined
·
342 Posts
Discussion Starter · #3 ·
To my knowledge you can't "mix and match" the cam caps. They are machined as a unit with the heads.

Hopefully someone will correct me on that if I'm wrong. :thumbsup:
That's kinda what I figured but I wanted to double check and make sure. Better safe than sorry.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top