TCCoA Forums banner

1 - 20 of 22 Posts

·
Registered
Joined
·
1,197 Posts
Discussion Starter #1
I've been gathering things together to do an NPI head swap with the PI cams and PI intake. Now I've got a 94, so it isn't really just bolt off, bolt on. I need to swap everything on the top over to 96/7 style. So what I need is some detailed pics of a 96/7 4.6 engine bay, or other 94/5's who have done the swap. I'd like to get lots of various angles so I can see routing of vac lines, wires, etc, because I will have no clue how it supposed to look once I start this. If you'd like you could either post them here or send them to me via email @ [email protected]

Thanks a bunch

Joe
 

·
Registered
Joined
·
632 Posts
Old pics
PI intake
No airtube, stocker removed to install GT tube.

<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-013.jpg>
<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-012.jpg>
<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-011.jpg>
<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-009.jpg>
<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-008.jpg>
<img src=http://img17.photobucket.com/albums/v50/madrussian/Car/Car-006.jpg>

Whenever you are messing with fuel lines on a fresh off the highway engine you can never be too safe :D
 

·
Refrigerator Raider Hater
Joined
·
11,719 Posts
you need the 96-97 fuel rails to go with the intake. you need the fuel lines to go with the fuel rails.

Read up on the PI headswap, as that's what you'll be doing but using NPI heads.

You might as well get a PI intake w/ alum. crossover and the parts for that.
 

·
Registered
Joined
·
3,391 Posts
Dude, clean your engine, DAMN... :tongue:







 

·
Registered
Joined
·
1,197 Posts
Discussion Starter #8
Excellent! Thanks guys, that's what I was looking for. It's those vac lines coming/going to/from the intake tube to the upper plenum that have me scratching my head. Now I should be prepared. Anyone know what a set of those vac hoses run from ford or dan?

Joe
 

·
Registered
Joined
·
3,391 Posts
Aawww... The last pic is the best DR. Are you almost don putting her back together??:D
 

·
Registered
Joined
·
2,577 Posts
Dr. FrankenCougie said:
Not even close, I have to finish Mike's first :(

Cougie's next door neighbor:




As you can see, GB has a ways to go... but I understand the heart we've been waiting for is just a trip to Michigan away...

-mike
 

·
Fry Rice Specialist
Joined
·
4,794 Posts
i'm in michigan.....wanna meet???
 

·
Registered
Joined
·
2,044 Posts
is he frigen stupid??????


we have a future Darwin award winner!!!


why in the hell would you make a wooden ramp like that fo a frigen car....


I hate when people do things half assed and they are proud of it and pass it off to others as a good idea....


He is going to get hurt or worse get someone else hurt. He needs to sit back and really think about what he is doing....\


and Scott you can be my Daddy to....:D
 

·
Registered
Joined
·
632 Posts
Hehe, Its probably not going to fall over, but I dont think I'd climb under there.

Maybe its the angle, but the posts that hold up the ramps look crooked.

Maybe if he used a metal frame, it could be pretty cool, for $250 he spent on wood you could probably find enough materials to make it metal.

-Andrey
 

·
Confirmed V6 Nut
Joined
·
2,261 Posts
Dr., that person ain't going to be around long. Tell him to "**** ***" and forget him.

You have a 5 star plus recommendation from a guy I trust.

Zippy, damn it, call us!
 
1 - 20 of 22 Posts
Top