[95tbirdguy]

Does anyone have a picture of which position on the coil goes to which cylinder for right and left sides? This would be on a 95 4.6.

 

[master486]

Here ya go:

 

[95tbirdguy]

I ran them that way and it still pops and misses. The coils plugs and wires are all new. before i started it ran great. I gapped the plugs right. double checked them.

 

[master486]

So why'd you replace the coils if they were fine? It's possible you now have a bad one. I'd triple check the wire routing just to be sure.

 

[95tbirdguy]

Because The old ones were not firing everytime.

 

[95tbirdguy]

Because The old ones were not firing everytime.

Well at least that's what the mechanic told me.

 

[tlpru]

the best is to pull all wires off....

do it over.....with the above print.....

go slow and tripe check as you go!....


if your getting a missfire...you will get a CEL

trent

 

[master486]

Then I'd say reinstall the old coils and route the plug wires according the above diagram and see what happens.