Powerdyne supercharger
1 - 2 of 2 Posts
Joined
·
874 Posts
The brackets might bolt up... I know a procharger and vortech do... if the brackets are anything like those two you should be alright... but as far as the intake piping the induction side will need to be made... the discharge side should eessentially bolt on... hopefully someone with a bit more knowledge on the matter will chime in.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
-
Catch can or oil separator?
SuperchargingCatch can or oil separator? Vented or sealed? And how do you have it setup? What you guys prefer with a boosted set up. 4.6 intercooled vortech explorer swapped tbird. Thanks!- 8
- 727
-
TwoHaggard · updated
-
Tapping the Oil Pan for a Vortech
SuperchargingSo any tips on tapping the oil pan for a Vortech on the 4.6. Really would like some tips from people that have done this on TBirds and NOT Mustangs. I don't wanna screw the oil pan too badly that I end up having to pull the motor and drop the pan, that's not something I want to end up doing.- 17
- 2K
-
ikutoisahobo · updated
-
allen aed m90 in the wild 1996 xr7 4.6
Supercharginghttps://youtu.be/PYRgbNCusBE duster 408 stroker vrs cougar 4.6 aed m90 supercharged close race 7.99 to 8.01 for the cougar- 2
- 484
-
iamcaper · updated
-
Install manual for ALLEN 4.6 M90 kit
SuperchargingHi, Does someone have manual for installing Allen M90 supercharger kit to 1996 Thunderbird/Cougar? I have complete used kit. But I am wondering if I need to relocate DPFE sensor? Also this kit is missing intercooler tank and some other minor components so install manual would be great. Tero- 9
- 2K
Join now to ask and comment!