TCCoA Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
Bought a set of edelbrock cylinder heads for my 302 and was wondering if the stock pushrods will work. I have a shaft mounted roller rocker setup, 60 cc combustion chamber, 2.02 x 1.60 valves, and the cam is an extreme energy from comp.
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #3 ·
they are the performer rpm with 190cc intake runners
 

·
Registered
Joined
·
1,369 Posts
Get an adjustable pushrod and check for sure.

John
 

·
Registered
Joined
·
647 Posts
:uppoint: What Dode said. The stock ones didn't work in mine...
 

·
Premium Member
Joined
·
2,725 Posts
Time Out. Are these old heads of some kind? What heads have they made with 2.02/1.60 with a 190cc runner? The Cleveland head is the only one close that I know of (but it has 2.05/1.60's) and not anything for a windsor that i recall (remember that i am old and my have forgotten one somewhere along the way but im pretty sure im right.) If your heads are #6022 then they are 1.90/1.60.
 
1 - 6 of 6 Posts
Top