[THill]

Ok guys i've got all the fastners out of the bottom and the large push pins top & bottom out, got the screws behind the corner lights and ones in the inner fender out but still it seams something is holding it on..is there another one or two somewhere that can't see that still holding it on ???...Feels like it's holding on still around the corner lights......

 

[sinhumane]

i think theres some behind the headlights too. when i was poking around for mine, i noticed a bolt or two behind each headlight

 

[twin turbo 281]

one bolt behind each turn signals, 2 bolts on each side behind the air dam bolting the air dam to the fenders and all the push pins and splash gaurd screws

 

[_95badbird]

the 2 screws behind the corner lights are like 5 mm or something really small like that....actually, it might be 4.5 mm.

 

[THill]

I found them...the two 11mm nuts holding it on the fender....thanks guys

 

[lightevergreenfrost]

heck, just run it into a tire tread, it will come right off a freshly painted bumper.