TCCoA Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter #1
im in the process of rebuliding my 89 6 cyl the block i got from a friend has roller lifters in it. did t-birds have stock roller lifters? so im going to go ahead and put roller rocker arms in there too. so my question is where can i find these for a 3.8 t-bird?and also can u get a better than stock cam for these cars and is so what should i use. this is the car im gonna race this year so the more hp the better;)
 

·
Registered
Joined
·
1,921 Posts
4.6gearhead said:
im in the process of rebuliding my 89 6 cyl the block i got from a friend has roller lifters in it. did t-birds have stock roller lifters? so im going to go ahead and put roller rocker arms in there too. so my question is where can i find these for a 3.8 t-bird?and also can u get a better than stock cam for these cars and is so what should i use. this is the car im gonna race this year so the more hp the better;)

www.rpm-mustangs.com for the roller rockers (harland sharp) and the cam
 

·
Registered
Joined
·
101 Posts
Discussion Starter #3
ok tnx for the reply now which is more suited to the need bolton or adjustable? and which should i use 1.73:1 or 1.80:1?and what kinda cam shaft should i use.

thanks again.
 

·
Registered
Joined
·
1,112 Posts
Yes, roller lifters were stock from 89 on.
 
1 - 5 of 5 Posts
Top