TCCoA Forums banner
1 - 8 of 8 Posts

· Hittin' Switches
Joined
·
1,635 Posts
Discussion Starter · #1 ·
does anyone have a fuse diagram? i dont have the cover on mine that says what is what. also, where else are the fuses for the dash and running lights, because this is the 2nd time this has happend, and when it does they both go out at the same time, so the problem is something that links them together.
 

· Registered
Joined
·
10,757 Posts
the fuse is I beleive a 10 amp. Just start pulling fuses and check. You have a short somewhere, something is grounding out. Is there anything tapped into the wiring harness for the headlamp switch? Ii would check there.
 

· Hittin' Switches
Joined
·
1,635 Posts
Discussion Starter · #3 ·
The Great Obucina said:
the fuse is I beleive a 10 amp. Just start pulling fuses and check. You have a short somewhere, something is grounding out. Is there anything tapped into the wiring harness for the headlamp switch? Ii would check there.
where is the harness for the headlamp switch?
 

· Hittin' Switches
Joined
·
1,635 Posts
Discussion Starter · #4 ·
check it out----


i looked at the fuse box, 1st row, furthest back fuse was missing, i went to slap a fuse in and it just fell out like it was loose up there or somethin, well i stuck another in and it stayed, and then my driving lights are back on **whatever the lights are that are on when your just driving, not your break lights, but the ones that are in the tails that stay on when your headlights are on**

so anyway... its workin for now.
 

· Registered
Joined
·
2,799 Posts
wow.. it happened again? i would check for shorts.... bigtime. mab blowing fuses or sumpin. dunno
 

· Hittin' Switches
Joined
·
1,635 Posts
Discussion Starter · #7 ·
sinhumane said:
wow.. it happened again? i would check for shorts.... bigtime. mab blowing fuses or sumpin. dunno

i found out what it was...

the fuse on the row closest to the drivers door, and then all the way in the back was wobbly, so it wasnt in there all the way, pulled it out, replaced it, got the new one in there good and it works fine.
 

· Registered
Joined
·
3,988 Posts
cool I had the same problem turned out to be a wire grounding out on the flip screen I went crazy with fuses test lights took out the cluster all to find it was just a loose wire :(
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top