TCCoA Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter #1
what is all needed besides the sc and hardware kit ? is a ic necesarry?

what sc 's are recomended!and what size belt am i gonna need? does it vary on what sc i get?

thanks in advance

cliff
 

·
Chief of Warranty Police
Joined
·
1,492 Posts
Check out this article on sccoa.com to learn a little about the subject.

What kind of supercharger you use can also depend on what kind of gains you're looking for. The stock Eaton blower for the SC's will do 12psi max with the stock pulley on it. Your other alternatives include Whipple, Allen, Vortech, amongst others.

I'm sure someone with more knowledge of aftermarket blowers will chime in.

Read this also.
 

·
Registered
Joined
·
1,921 Posts
Don't let anyone tell you that you can not do it, because I have :D ................... Its alot of custom work though.
 

·
Chief of Warranty Police
Joined
·
1,492 Posts
Hehehehe rock on! :thumbsup:
 

·
Registered
Joined
·
104 Posts
Discussion Starter #6
so ive been reading some of these threads and its making me wiery on what im all gonna need to upgrade if i get a blower!

one i saw plugs
two i saw injectors
three lots of jiberish i didnt evan understand! hehe

i have just a stock 3.8 na cold air intake and a deleted a/c duals are on there way

what exacttlly does anyone no im gonna need besides blower and hardware kit!?

thanks in advance
 

·
Chief of Warranty Police
Joined
·
1,492 Posts
Did you read either of the links I posted?

You're going to have to upgrade a few parts to handle the stress and compensate for the increase in air flow. How far you take it is entirely up to you.

Try a few forum searches, I know there are a couple others who have done what you are trying to and have no doubt posted about their experiences.
 
1 - 7 of 7 Posts
Top