TCCoA Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
855 Posts
Discussion Starter #1
hey guys, for those of you who have modified intakes w/ cone filters and the like, i was wondering where you guys put the IAT sensor....
 

·
Refrigerator Raider Hater
Joined
·
11,719 Posts
I made a smallbox for mine, with one end open, then put a fine mesh screen over it. It doesn't make alot of difference as long as it's not getting alot of airflow past it (windchill would change what temp reading) and it is NOT insulated from the ambeint air.

I know others have simply jammed it into thier cone filter, and others just leave it exposed.
 

·
Real Ultimate Goatse Hunter
Joined
·
850 Posts
I did mine like richard m. I am using the TB adapater (connects the violin case to the throttle body) to connect my MAF to my intake tube. There is a spot on it to stick the sensor. Of coarse, this is if your car is a 94-95.. you didnt specify.

EDIT: ok you didn't specify but your name implies what you have ;)
 
1 - 3 of 3 Posts
Top