[funderbird]

So, the person I purchased the car from put three differant alarm systems in to the car. A cliford immoblizer, avaitin car alarms and a auto paging system. The car won't start at all. I found the little key that has to be pluged in to the slot won't work any more. Three of the four wires for the module to the immobilizer have broke off. Anyone know or have an alarm schematic? I am so screwed...

 

[MadMikeyL]

Just rip out all that stuff and put it back the way it was from the factory. You should be able to figure out by looking at it which factory wires were cut, and put those back together, then just cut out everything having to do with the aftermarket alarms and throw it away.

Mike

 

[sunboy52]

wtach what you cut and reconnect, some same colered wires under the dash if connected cause problems..... My friend ripped his 3 diff. alarms out of his mustang, and his car wouldnt start... not good...

 

[birds4us]

I agree, take the alarms out, carefully.

 

[Chris_Murder]

I have two in mine and the second one anoys me it was ment for a 4 door car but put on mine by a previous owner, my alarm horn has a power and negative wire spiraling to nowhere and when it locks or unlocks it moves the drivers lock once and the passenger side 3 times grrrrrrrrrr

 

[firescout211]

if you are unsure of what to do your best bet is to get it towed to an alrm shop and have it professionally done. should be around $75 in labor to cut it all out.

 

[JustinH]

get a compustar alarm/starter.

Best alarm on the planet, and excellent starting range.

I use it on the truck, its excellent.

 

[dwinthrup]

get a compustar alarm/starter.

Best alarm on the planet, and excellent starting range.

I use it on the truck, its excellent.

i second that

 

[Greybird94]

i had that problem with a car i bought, still had the breathalizer hookup in it. Wires corroded and wouldnt start.

 

[Nativedetroiter]

I will have to give Funderbird a call. They have been busy over at the crazy house.... LOL> But I assisted him in getting his dash back together successfully, he deleted the one alarm that kept the car disabled, that is what he was looking for. Once he removed that alarm, which required a key type inserted into a hole in order for the car to start that was in the center console. He replaced the center console with a 97 one, and it was all good. Started right up, once I had everything together.

 

[funderbird]

Thanks Roger!
I have been swamped at work, school and four kids. I couldn't see how to get that dash on with out breaking it...