TCCoA Forums banner
1 - 1 of 1 Posts

·
Confirmed V6 Nut
Joined
·
2,261 Posts
There are 2 things that could be wrong. Under the black plastic cover there is your air intake for the cabin. It should have a lip of metal all around the opening, about 1/2" tall. If it is rusted through, caulk, JBWeld, or something to build up that wall again.

Another thing could be an improper windshield seal. That is what I had. If you know a body guy, he can show you where to install a half inch wide and half inch deep foam strip to route your water away to the drain Ford intended the water to go. I didn't do this myself. Another guy did it for me on the passenger side.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top