TCCoA Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter #1
what size drill bit do i need to do a 3/8 tap for a pi swap?
 

·
Premium Member
Joined
·
2,725 Posts
The correct drill bit size for a 3/8"-18 NPT tap is 37/64" (some materials will allow you to go with a 9/16 but not normally in any material that is either porous or soft.)
 

·
Registered
Joined
·
7,758 Posts
1 - 3 of 3 Posts
Top