TCCoA Forums banner

1 - 5 of 5 Posts

·
5oh Transformer
Joined
·
1,085 Posts
Discussion Starter #1
Hey guys and gals. My father was just given a tanning booth and we need some wiring help. I spent damn near and hour and cant seem to figure out this wiring 100%. here is the schematic that was on the main lighting.


As you can see we had some pretty bad arcing at one point. Alright so you can see at the lower right the power runs in. We have black, red, white, green. What the hell would the white connect too? If you look at the left side where the collection of light walls are you will see that white connects to all the panels. Black connects to panels 5,4,3. While red connects to 5,2,1. When we put the thing together there was a huge four prong wire that connects 5 to 4, then from 4 to 3. Next there was a smaller 3 prong going from 3 to 2 and then another from 2 to 1. Any help would be great.
 

·
5oh Transformer
Joined
·
1,085 Posts
Discussion Starter #3
With 220 i thought that ground was my neutral wire?
 

·
5oh Transformer
Joined
·
1,085 Posts
Discussion Starter #5
alright then since its 4 wire and white is the neutral i take my ground just to an earth ground?
 
1 - 5 of 5 Posts
Top